Subwoofer Isolators
DIY isolators and bass traps customized for my SVS 16-46PC+ subwoofers. Constructed of 18" diameter pine, 2" insulating foam, 2" rigid fiberglass, and black felt. Total construction time approximately 2.5 hours.
Date: 2007.07.29
Size: 8 items
Views: 7305
Insulating Foam Cuts
The foam will isolate the riser from the floor.
Date: 2006.03.18
Views: 1980
The foam will isolate the riser from the floor. Using a fine-tooth hand saw, I cut the 2" insulating foam into roughly measured wedges, 4" at the widest part.
2006.03.18
View Slideshow
Underside w/Foam
The underside of the isolator with foam attached.
Date: 2006.03.18
Views: 2910
The underside of the isolator with foam attached. The 2" insulating foam has been glued onto the 18" diameter pine using liquid nails.
2006.03.18
View Slideshow
Semi-Rigid Fiberglass
The semi-rigid fiberglass will absorb some sound.
Date: 2006.03.18
Views: 1973
The semi-rigid fiberglass will absorb some sound. The 2" rigid fiberglass was cut into 9"x15" rectangles using a fine-tooth hand saw, and then glued into the center area using liquid nails.
2006.03.18
View Slideshow
Felt Wrap (Beginning)
The beginning of the felt wrapping process.
Date: 2006.03.18
Views: 3325
The beginning of the felt wrapping process. The sewing will be done on the top of the isolator, as the bottom should remain level and my subs already have little feet so minor imperfections will not matter.
2006.03.18
View Slideshow
Felt Wrap (Continued)
The felt wrap with two sides sewn together.
Date: 2006.03.18
Views: 3605
The felt wrap with two sides sewn together. Somewhat like wrapping a gift, the felt does not need to be wide enough to completely cover in one direction. The felt coming from the other ends will cover the bare area.
2006.03.18
View Slideshow
Top Stitching
An overhead view of the felt wrap top stitching.
Date: 2006.03.18
Views: 2702
An overhead view of the felt wrap top stitching.
2006.03.18
View Slideshow
Side Stitching
A close up view of the side stitching that closed up the felt wrap.
Date: 2006.03.18
Views: 3440
A close up view of the side stitching that closed up the felt wrap.
2006.03.18
View Slideshow
Finished Isolators
The finished product, covered in black felt.
Date: 2006.03.18
Views: 2257
The finished product, covered in black felt. One for each of my subwoofers.
2006.03.18
View Slideshow
Insulating Foam Cuts
